Barrels and filling lubricants should be stored in the warehouse in the possible range to avoid climate impact, the barrels of oil must be stored in the warehouse. The oil bucket is suitable for lying, both sides of the bucket must be wedged with wood wedges to prevent rolling. In addition, the oil drums should be inspected regularly for leaks and the markings on the barrel surface are clear. If you must put the bucket straight, it is advisable to invert the bucket, so that the lid downward, or slightly tilt the bucket, so as not to gather the rainwater in the bucket and cover the bucket bolt. Water has adverse effects on any lubricating oil.
On the surface, water is not easy to penetrate the full bucket lid and into the oil barrels, however, stored in the outdoor oil barrels, daytime exposure to the sun, the weather is cooler at night, the expansion and contraction will affect the air pressure in the bucket; This shift in day and night pressure produces a "breathing" effect, daytime part of the air is "exhaled" barrels, night air is "inhaled" barrels, if the bucket cover immersed in water in the night will inevitably be with the air into the bucket, the cumulative accumulation of water in the oil is natural considerable. When the oil is taken, the oil drums shall be placed on a highly suitable wooden frame, the top of the barrel surface is fitted with a faucet to put the oil, and a container is lowered in the faucet to prevent splashing. Or put the oil drums straight from the barrel Gaikou into the tubing through the hand pump to fetch the oil.
Storage of bulk oil in oil tanks will inevitably have condensation water and contaminants infiltration, eventually gathered at the bottom of the tank to form a layer of mud-like substances, so that lubricants are contaminated. Therefore, the bottom of the tank is designed to be suitable for the butterfly shape or tilt, and to install drain cocks to discharge water and contaminants on time. Within a possible range, the tank should be cleaned regularly.
temperature on the impact of lubricating grease than on the large, long-term exposure to high temperature (such as: sun exposure), can make the grease in the oil component separation, so the grease bucket should be stored first in the warehouse in the bucket mouth upward vertical put appropriate. The barrel of the lubricating grease is larger, the dirt and water are more easily infiltrated, and the lid of the bucket should be tightened immediately after taking it.